- This topic has 4 replies, 3 voices, and was last updated 4 years, 9 months ago by
expired-member.
- Topic
Supposedly, my 2014 LS36fw has a built-in water pressure regulator. I have not seen it nor depend on as I have used a Watts oil-fill gage regulator. I have it set to 55psi and have it attached at the water inlet on the RV having been told that best protects the RV from higher pressures.
I have been to a few campground with really high water pressure and am concerned that the pressure between the water supply and the regulator will rise to the point it will rupture the hose. I actually had it happen back in October. I saw the same thing happening this past week so I installed the cheapie regulator on the hose bib to reduce the pressure in the hose. Of course, this reduces the water pressure coming into the rig to a level I’m not thrilled with.
I’m curious what others are doing to protect high waste pressure. What kind of regulator you use, set-piont, and what end of the supply hoe you install it on. Thanks.
- You must be logged in to reply to this topic.