2011 Cameo Black Tank Rinse

I’m just curious as to the type of black tank rinse Carriage installed on our rigs. Mine is a 2011 Cameo 31ksls with a 62 gallon black tank. After breaking the back flow preventer valve under the bath vanity I replaced it with a simple brass one way valve. I have never had a problem. However, while using the tank flush today at a campground I’ve been to a few times, the sound of the water flowing into the tank did not sound as strong as I have heard before. The water hose connection has a inlet screen and it is not clogged. I’m just if my brass back flow preventer has gone bad in a years time or if the sprayer end has become clogged or???? No leaks anywhere. I’d just like to have a better understanding of what is on the inside of the tank where the water exits. Is there a rotating sprayer or just a fixed sprayer, or does the water just flow into the tank. Thanks, Phillip

jdpm
Maybe lifestyle rv could help with this. I wish I could.Good luck

It is a rotating sprayer, it puts out a fan type spray. Mine is located by the in pipe from the commode. Hopefully that helps prevent the dreaded TP teepee.

Hi jdpm – Here’s a link to the web site of the manufacturer (B&B Molders) of the flush system in our 2011 Cameo 34SB3. The link is for a PDF explaining products – scroll down to “The Flusher” which has a diagram of the system.

http://www.bandbmolders.com/pdf/B_BCata … ection.pdf

It sure would be nice to have this same feature in the gray water tank.

Traveler wrote:It sure would be nice to have this same feature in the gray water tank.

I have one to put in my grey tank, just have to find my round toit so I can get started.

That’s a good ideal, I’d like see how you do it rvinsaint. I’ll let you have my round toit!

Now you’ve been toit-ed!!

I think maybe I’ll put one in also, I’ll let you know when I get around to it.

rvinsant wrote:It is a rotating sprayer, it puts out a fan type spray. Mine is located by the in pipe from the commode. Hopefully that helps prevent the dreaded TP teepee.

I don’t think it is a rotating sprayer head.
“Spin weld” refers to the method of welding the head into the tank.
I think the sprayer head is fixed.

Sheff