Bay Area Mobile Tech – Update (From Old Forum)

LANDING PAGE Forums GENERAL DISCUSSION & FEEDBACK REPAIRS by DEALER, REPAIR FACILITY, or MOBILE TECH Bay Area Mobile Tech – Update (From Old Forum)

  • Creator
    Topic
  • #27707
    CLOC-AdminCLOC-Admin
    Keymaster


        Morber

        Jul 15, 2017#1

        No longer Based in Dublin, CA. Homebase is now Sutherlin OR as we are now full timing. Service area is west coast (CA, NV, OR, WA, ID) based on travel schedule, etc. – can also meet up.

        Specializing in disc brake upgrades and suspension updates (HD wet bolt shackles, equalizers, crossmembers, shocks, etc).  Other repairs as well. Own a Cameo, so know those inside and out – love Carriage products, but work on most other units with exception of propane at this time.

        Need help, happy to talk to you. Drop me a note or call 925-518-9439. Wife insisting on business name change so current site http://www.hrcrv.com will redirect to it once decided.

        Looking forward to helping you stop faster and ride smoother.
        Bill

        Last edited by Morber on 10:07 AM – Aug 18, 2018, edited 1 time in total.

        TimCar

        May 20, 2018#2

        I can now highly recommend Bill Perrin from Bay Area Mobile Tech for just about anything you need to make your rig safe to drive.

        We had Bill install new Dexter Axles, Titian Disc Brakes, Titian Hydraulic Brake Controller and three MorRyde Cross
        Braces on our 2010 Cameo 35SB3, and he did an absolutely fantastic job!

        Bill goes out of his way to do the little things that make for an extra special Professional installation. He arrives very well prepared, with lots of extra parts to replace the needed things that alway seem to come up short.(bolts/washers/clamps/wiring parts/etc).
        It very obvious that he’s “been there, done that, here’s what you need”

        What he did to our rig is exactly what Carriage should have done in the first place.

        Before it was white knuckles to pull, sweating out the distance between us and the vehicle in front of us and the Bozo’s on the road, knowing we had no chance of stopping in time when they cut in front of us.
        We had to rely mostly on the truck’s braking system to slow/stop us.

        Now I know that if the trucks brakes ever failed, I can use the trailer to stop us, no problem.

        It’s amazing how much stress it use to take to drive and the wear and tear that puts on the driver. I was mentally exausted from the stress by the end of each pull.

        The new Cross Braces mean no more twisting of the rig. We can even use the closet and all of the doors inside while towing, something we could never do before!

        Bill’s work is impeccably clean, with the proper amount of ties and clamps and fine attention to the small details so you know the new systems will work as they should long-term.

        I can’t thank Bill enough for the comfort of having to remind myself that I have a rig behind me. I really can’t feel it pushing/swaying anymore.

        Tim

        Morber

        May 20, 2018#3

        *blush*. Thanks Tim for the kind words. Coming from you, it means a lot – your standards are very high. Over the past couple of years we have learned a lot about RVs. The one area that I was shocked about was brakes and suspension, the one area you can’t see but your life and safety depend on. Helping fellow RVers correct that is something I enjoy doing – and I take pride in my work. I’m grateful I have the skills.

        Thanks again Tim!

         

        B.W.Gentry
        Owner/Admin
        2007 Carri-Lite XTRM5
        Breckenridge, TX

      • You must be logged in to reply to this topic.