- This topic has 0 replies, 1 voice, and was last updated 5 years, 9 months ago by
Anonymous.
Anonymous.- Topic
- Anonymous
- Topics - 5
- Replies - 0
- Total - 5
Does anyone know the brand and or model number of the kitchen faucet that is installed in the 2016 LS37CKLS? The pressure on this faucet sucks. I have searched high and low for the water flow restrictor and I can’t find one. I am thinking of replacing this thing for one that has a lower profile so water does not splash everywhere but in the mean time I would like to have enough water pressure to make suds.Thanks
Posted: 11:38 AM – Oct 11, 2016Ours is: Dura
model: DF-NMK503Posted: 12:36 PM – Oct 11, 2016If this is the only faucet with low pressure, the screen could be clogged. Does this have the pull down sprayer like in Bolljl’s illustration? If you can’t find a screen in the head, it may be underneath, where the pulldown originates. you’ll have to disconnect the hose at the supply end of the pulldown and look there for the screen.Cliff
Posted: 12:39 PM – Oct 11, 2016…keep in mind the aerator and screen are not standard size. If it’s an rv faucet it’s smaller and parts for home faucets won’t fit.Posted: 2:08 PM – Oct 11, 2016Do replace it and never look back. It is simple. Hole in counter is standard size. You may need a hole plug since most good ones use only one hole. The hole plugs come in a variety of finishes to match the new faucet or the counter top. Delta makes a great one.“I am thinking of replacing this thing for one that has a lower profile so water does not splash everywhere.”
The RV faucet does have a strainer in the head that does clog with debris and minerals. Probably need pliers to remove the first time, after that you easy out so long as you only hand tighten.
Posted: 7:29 PM – Oct 11, 2016I have replaced mine with standard household fixturesPosted: 8:02 PM – Oct 12, 2016I replaced mine with a Moen, but the mixing valve is part of the single unit. I had to enlarge the hole, but used the second hole for a soap dispenser.Posted: 3:13 PM – Oct 13, 2016I replaced the original with a pfister that looks virtually the same. Like PapaCliff above, I also used the second hole for a soap dispenser which is really convenient btw.
- You must be logged in to reply to this topic.