Grey Tank Manual Valve Operation

Disaster. Where is the grey tank manual valve located that I can open with an Allen wrench?
My switch stopped working and I’ve searched the web for replacement PhaseFour switches, but they are no where to be found. I did find an 8 pin marine Carling switch that I’m going to try, but I must get the tank emptied FAST…it’s leaking all over the pad!

Topic

[CLOC-AdminKeymaster]

Doug,

You’ll have to open the tank cover that is covering the holding tanks if your electric valves are not exposed (in view). If there is not an opening provided, you’ll have to cut one. Make sure its where the grey water exits the grey water tank. Once you locate the valve, on one of the sides there is a round disk-looking spot/plate with the Alan wrench opening in the center of it. Just insert the wrench into the side of the valve and turn it to open & close the valve manually. Attachment Image included.

Here is a link you might try also:  https://valterra.com/product-category/rv-products/oem/

 

Attachments:

You must be logged in to view attached files.

B.W.Gentry
Owner/Admin
2007 Carri-Lite XTRM5
Breckenridge, TX

[Author]

Replies