Norcold 1210 replacement (From TapaTalk Forum)

LANDING PAGE Forums COMMON RV COMPONENTS & ISSUES MAJOR APPLIANCES Norcold 1210 replacement (From TapaTalk Forum)

  • Creator
    Topic
  • #28646
    CLOC-AdminCLOC-Admin
    Keymaster
        Posted: 11:58 AM – Jul 30, 2017
        winkeler
        I have a 2008, F35SB3 and want to replace my Norcold 1210 with a residential unit. I am looking for the best fitting replacement, door lock information and I question how well the glass shelves hold up with the roads getting worse every year?
        We travel 6 to 7 months a year, mostly 200 miles per day. I try to always use full hook up RV Parks. I don’t believe I need to address DC/AC power while traveling.

        Posted: 1:01 PM – Jul 30, 2017
        retiredfields
        My Sears / Whirlpool unit was almost an exact fit. Had to cut 1/4″ off of the width opening and lower the shelf it sits on by about 3/4″. No problems with the glass shelves and we travel with the fridge full of stuff. I also added an additional acrylic shelf for more storage.

        My Sears model number is 106.4112. Not sure of the Whirlpool equivalent.


        Posted: 1:36 PM – Jul 30, 2017
        jdpm
        We replaced ours with a Samsung 3 door unit. Fit perfectly. Was less than $1k, has an ice maker (we did not hook up since we don’t full time) and is the quietest fridge I have ever been around. Its weight is just shy of the old Norcold, too. You’ll find lots of info on the site from those of us who have made the switch. Best mod I’ve ever done to any RV!

        Posted: 7:52 PM – Jul 30, 2017
        vairman
        One of the biggest limitations to our Residential fridge search was finding one to fit through the door. The entry way is limited to 27 3/4 inches. That limits us to a Counter depth fridge and even some of those were too deep to fit in. We are looking at the Samsung RF18HFENBSR.

        Mark


        Posted: 8:24 PM – Jul 30, 2017
        falconhunter
        We were able to fit a full depth Whirlpool through the door with the fridge doors removed. Just fit through the 27 3/4 door with no room to spare.
        Chip


        Posted: 8:58 PM – Jul 30, 2017
        jdpm
        Ditto on the Samsung 18, as well. With the doors removed, no issue. Plus the back is totally sealed so other the plug is go against the wall.

        Posted: 9:24 PM – Jul 30, 2017
        vairman
        jdpm wrote:Ditto on the Samsung 18, as well. With the doors removed, no issue. Plus the back is totally sealed so other the plug is go against the wall.

        Have you been happy with the Samsung? I read some non complimentary articles about the Twin Cooling system.

        Thanks.

        Mark


        Posted: 2:30 PM – Aug 03, 2017
        jdpm
        vairman wrote:

        jdpm wrote:Ditto on the Samsung 18, as well. With the doors removed, no issue. Plus the back is totally sealed so other the plug is go against the wall.

        Have you been happy with the Samsung? I read some non complimentary articles about the Twin Cooling system.

        Thanks.

        Mark

        Totally happy with it! It will have been in the rig 3 years soon and has been problem free. Its super quiet so much so there have been times I’ve questioned whether its running. In the FL heat, a 90+ degree cabin, it will cool to proper temps in both compartments in 3 hours or less. No regrets!


        Posted: 3:03 PM – Aug 03, 2017
        vairman
        jdpm wrote:

        vairman wrote:

        jdpm wrote:Ditto on the Samsung 18, as well. With the doors removed, no issue. Plus the back is totally sealed so other the plug is go against the wall.

        Have you been happy with the Samsung? I read some non complimentary articles about the Twin Cooling system.

        Thanks.

        Mark

        Totally happy with it! It will have been in the rig 3 years soon and has been problem free. Its super quiet so much so there have been times I’ve questioned whether its running. In the FL heat, a 90+ degree cabin, it will cool to proper temps in both compartments in 3 hours or less. No regrets!

        We will be back “home” in 2 weeks and will have access to tools and manpower, so it looks like by the end of August, we will be joining the Residential Frig group!

        Mark


        Posted: 3:37 PM – Aug 03, 2017
        jdpm
        I can’t see you’ll have any regrets unless you are a boon-docker without a genset or solar. We’re all standing by to help you along the way! Safe travels.

        Posted: 11:32 AM – Sep 05, 2017
        Tech36FWS
        jdpm wrote:We replaced ours with a Samsung 3 door unit.  Fit perfectly.  Was less than $1k, has an ice maker (we did not hook up since we don’t full time) and is the quietest fridge I have ever been around. Its weight is just shy of the old Norcold, too.  You’ll find lots of info on the site from those of us who have made the switch.  Best mod I’ve ever done to any RV!

        Do you have a model number on your Samsung.  It seems to me that Most of the Samsung R18’s you have to make a larger hole.  What model is yours?


        Posted: 6:52 PM – Sep 05, 2017
        vairman
        Tech36FWS wrote:

        jdpm wrote:We replaced ours with a Samsung 3 door unit.  Fit perfectly.  Was less than $1k, has an ice maker (we did not hook up since we don’t full time) and is the quietest fridge I have ever been around. Its weight is just shy of the old Norcold, too.  You’ll find lots of info on the site from those of us who have made the switch.  Best mod I’ve ever done to any RV!

        Do you have a model number on your Samsung.  It seems to me that Most of the Samsung R18’s you have to make a larger hole.  What model is yours?

        The model # is RF18HFENBSP.  I just did the upgrade and it fits perfectly.

        Mark


        Posted: 2:13 PM – Sep 11, 2017
        Tech36FWS
        falconhunter wrote:We were able to fit a full depth Whirlpool through the door with the fridge doors removed. Just fit through the 27 3/4 door with no room to spare.
        Chip

        What is the model number on that fridge?


        Posted: 7:13 PM – Oct 01, 2017
        winkeler
        It has been a couple of weeks. I bought a Sears side by side with plain doors, no dispensers. Kenmore part # 41129,  21.5 cu. ft. Side-by-Side Refrigerator – Black. The side by side will allow me to tie the two door handles together for traveling. I needed to remove the three inch wood trim at the top and shave 1/4 inch from a side piece. I moved the electric box and deleted the frig’s propane line. All propane fittings are bubble water tested, tight. Tomorrow I slide the frig in and onto my next repair.

        If anyone needs a little paneling, Carriage used the wall panel at the back of the Norcold’s for spacing. There’s a 3 x 4 foot section of factory panel that matches the walls. I needed a patch piece a couple of years ago and could not match the original panel. I came close but not exact. I saved the frig’s panel for later.

        Thanks to all for your help and ideas.

        B.W.Gentry
        Owner/Admin
        2007 Carri-Lite XTRM5
        Breckenridge, TX

      • You must be logged in to reply to this topic.