Rear Bigfoot Jack Height (From TapaTalk Forum)

LANDING PAGE › Forums › COMMON RV COMPONENTS & ISSUES › FRAME, SUSPENSION COMPONENTS, LEVELING SYSTEMS, HITCHES, WEIGHTS & WEIGHING, and TIRES › LEVELING SYSTEMS › HYDRALIC LEVELING SYSTEMS › Rear Bigfoot Jack Height (From TapaTalk Forum)

  • Creator
    Topic
  • 06/22/2019 at 1:14 pm#28956
    CLOC-AdminCLOC-Admin
    Keymaster
        Alloy
        I putting the Bigfoot jacks back on but I forget to get a measurement from the landing pad to the ground before I removed the rear jacks.

        Could someone check the measurement they have.

        If the cylinder is extended it could be the distance from the edge of the cylinder down to the top of the landing pad….as long as the landing pad is on the ground.

        Thank You

        Posted: 4:38 PM – Aug 13, 2017
        DandK-Travelers
        Is this what your looking for?

        The cylinder is about 1 1/4 inch below the frame rail.

        Posted: 6:44 PM – Aug 13, 2017
        Alloy
        DandK-Travelers wrote:Is this what your looking for?

        The cylinder is about 1 1/4 inch below the frame rail.

        Yes, perfect!

        B.W.Gentry
        Owner/Admin
        2007 Carri-Lite XTRM5
        Breckenridge, TX

      • Creator
        Topic
      • You must be logged in to reply to this topic.